Phosbright 60 removes water hardness, milkstone deposits and sanitises in one operation. It also removes surface rust from ferrous metals and protects against subsequent re-rusting.
Phosbright 60 may be used with CIP equipment, spray systems, soak tanks or manually.
Phosbright 60 contains over 60% phosphoric acid, wetting agents, and 2.0% alkyl benzyl dimethyl ammonium chloride minimum.
Wear gloves, eye protection and protective clothing.
Phosbright 60 may be identified by its clear pink appearance, pH of 0-2, density greater than 1.30 Kg/L, and a minimum of 600g/L phosphoric acid by titration.
MPI approval C31 (all animal except dairy)
Directions for use:
Scale Removal: Dilute to 2% (20mL/litre or 1:50) to remove water hardness deposits or milkstone in CIP systems.
Circulate at 60°C for 30 minutes then rinse. Cooler water may be used with higher concentrations or longer contact times. Rinse with cold water.
Automatic Dishwashers are best de-scaled by shutting off the automatic feed, dosing as above (20mL/litre), then running for 15 minutes.
Where circulation is not possible scale removal may be accelerated by using hotter water, longer reaction times, or by scrubbing.
Rust Removal: Neat or diluted up to 30% (300ml/litre).
Apply to surface for 5 – 30 minutes. Rinse with cold water.
Hooks, Slides and Gambrels: Use at 7% minimum at 80-90C for 5-10 minutes when part of a 5 bath system.
Available in 5L
Safety Data Sheet